Table of Contents
Advertisement
• When you enter PATTERN mode, the QY700 displays the
PATCH screen. You can use this screen to create a pattern
(by arranging phrases onto the 16 pattern tracks), or to se-
lect and replay an existing pattern.
• During pattern playback, you can change the chord setting
so that the pattern modulates. If you enable the fingered-
chord switch, you can make the changes by playing appro-
priate chords at the microkeyboard or at an external MIDI
keyboard.
• The lower half of the PATCH screen shows the pattern's
phrase arrangement, by measure and by track. You can
change the phrase settings directly at this screen. By select-
ing different voices for each track, you can easily build and
try out a wide number of multipart variations (drum plus
guitar plus bass, and so on).
To select and play a pattern
1. Press
.
The QY700 enters PATTERN mode. The PATTERN indi-
cator lamp comes on.
2. Select the pattern. (
p.202)
• Move the cursor to the style-number and section-letter ar-
eas on the screen, and make your selection using the data
dial,
/
, or the numeric keypad.
3. Press
to start playback.
• The PLAY indicator lamp comes on, and the QY700 begins
playback of the selected pattern. The QY700 repeats the
pattern until you change the selection or switch playback
off.
4. Press
to stop the playback.
To create a pattern
1. Press
2. Select the pattern that you want to work on.
• Move the cursor to the style-number and section-letter ar-
3. Set the pattern length and time signature. (
• Press
4. Move the cursor to the appropriate phrase-entry loca-
• Move the cursor to the appropriate track and measure loca-
5. Make an initial selection using the data dial or
6. Complete the selection. (
• The phrase number consists of three sections: the instru-
• To enter a rest rather than a phrase: Press
• To delete a phrase or rest setting: Move the cursor to the
7. Set the beat shift and scale time (
• Move the cursor to the beat-shift and scale-time entry ar-
• Note that the following controls continue to be effective
• If you want to hear one of the phrases playing alone, select
Chapter 5. PATTERN MODE
.
The QY700 enters PATTERN mode. The PATTERN indi-
cator lamp comes on.
eas on the screen, and make your selection using the data
dial,
/
, or the numeric keypad.
[D1] or
[D2] to move the cursor into
the appropriate setting area. Set the values using the data
dial,
/
, or the numeric keypad.
tion.
tion (lower half of the screen).
The QY700 displays the phrase name and number.
p.207)
ment category, the beat value, and a sequential number. Move
the cursor to each of these sections as necessary, and make
your selection using the data dial,
keypad.
setting, and press
(Clear).
eas, and set the values using the data dial,
numeric keypad.
while you are working at the PATCH screen:
,
, and the shuttle dial.
the phrase with the cursor and then press
The QY700 will begin repeated solo play of the selected
phrase.
1. PATCH
p.204.)
/
.
5
/
, or the numeric
(Rest).
p.206, 207)
/
, or the
,
/
,
(PhrSolo).
201
Advertisement
Table of Contents
