Editing Tracks 1 And 2 - Yamaha QY700 Owner's Manual

Editing tracks 1 and 2

Quantize
• Quantize is a job that corrects the timing of notes. Let's
quantize to track 2, which was recorded using realtime re-
cording.
1. Press to access the Job menu.
2. Select the Quantize job.
(1) Use the data dial,
cursor to "01 Quantize."
(2) Press to access the Quantize job.
3. Specify the track which will be Quantized, and the note
value that will be the basis for quantization.
Track to be quantized
(1) Move the cursor.
(2) Use the data dial,
values. If you wish to set other values, move the cursor with-
out pressing . If you press
(3) When you have made all settings, press
job.
• For track 2, set TR=02 and Quantize=
Play Effect Groove Quantize settings
• The same type of Groove Quantization that you used on the
pattern can also be applied to song tracks 1 and 2.
1. Access the Play Effect Groove Quantize display.
(1) From Song Play, press
fect.
(2) In Play Effect, press
Quantize display.
/ , or the cursor keys to move the
Note value
that will be the basis
for quantization
/ , or the numeric keypad to set the
the job will be executed.
to execute the
(PlayFx) to access Play Ef-
(Groove) to access the Groove
2. Move the cursor.
• Move the cursor to set.
• For this example, set Template and Strength.
3. Use the numeric keypad to enter the values, and press
.
• Set both tracks 1 and 2 to a Template of 4.
• Set Strength to 50 for track 1, and 18 for track 2.
4. When you finish entering the values, press
return to Song Play.
Now let's playback.
• Press the sequencer key
• Listen to the changes in the performance that are produced
by Quantization and Play Effect.
Chapter 1
BASIC CONCEPTS
1
to
to playback the song.
65