Yamaha QY700 Owner's Manual page 192

• In the Connection page you can make settings such as the
Variation Mode, the effect type for each effect, and return
levels.
• For details on how the effects work, refer to "Chapter 1.
BASIC CONCEPTS" (
1. Press .
The indicator located above
the four sub-modes of Effect mode (the last-selected sub-
mode) will appear.
2. Press (Connect) to access the Connection
page.
3. Move the cursor to the parameter that you wish to set.
4. Use / , the data dial, or numeric keypad
to specify the value.
• In Effect mode, keys such as
will function in the same way as in Song Play. Using these
keys, you can modify settings in realtime while you listen
to the playback.
1. Data display
• This displays the settings of the parameter where the cursor
is located.
2. Variation mode
• This parameter lets you specify whether the Variation ef-
fect will function as an Insertion effect or as a System ef-
fect. ( p.48)
• If the Variation effect is used as an insertion effect, it can be
used only by one specific part. In this case, a modulation
wheel or foot controller can be used to control specified
parameters.
• If the Variation effect is used as a system effect, it can be
used by all parts in the same way as the Reverb and Chorus
effects, with adjustable Send Level and Return Level. In
this case, it will not be possible to use controllers to control
specific parameters.
Insertion, System
0101
1101
• Insertion
The Variation effect will function as an inser-
tion effect.
• System
The Variation effect will function as a system
effect.
p.47).
will light, and one of
, , , and /
Chapter 4. EFFECT MODE
3. Reverb type
• This sets the effect type of the reverb.
NO EFFECT, HALL 1, HALL 2, ROOM 1, ROOM 2, ROOM
0101
1101
3, STAGE 1, STAGE 2, PLATE, WHITE ROOM, TUNNEL,
BASEMENT
4. Reverb return
• This sets the amount that is returned from the reverb, ad-
justing the overall reverb effect for all parts.
000 – 127
0101
1101
5. Reverb pan
• This sets the stereo location of the signal from the reverb
effect (the processed sound).
Left63 – Center – Right63
0101
1101
• Left settings move the sound toward the left of the stereo
image, and Right settings toward the right. A setting of
Center places the sound in the center.
6. Chorus type
• This sets the effect type of the chorus.
NO EFFECT, CHORUS 1, CHORUS 2, CHORUS 3, CHO-
0101
1101
RUS 4, CELESTE 1, CELESTE 2, CELESTE 3, CELESTE 4,
FLANGER 1, FLANGER 2, FLANGER 3
1. Connection
4
191