Table of Contents
Advertisement
• Here you can make detune and note shift settings for each
part that will apply during song playback or recording.
• These settings can be made while the song is playing back,
and tracks can also be muted or soloed, just as in Song mode.
1. Press
.
The indicator above
Voice mode.
2. Press
(Tune) to access the Tune page.
3. Use
part. You can switch between the screens for parts 1–
16 and parts 17–32 by pressing
4. Move the cursor to the parameter that you wish to set.
5. Use
/
, the data dial, or the numeric keypad
to set the value.
• In Voice mode, keys such as
will function in the same way as in Song Play mode. You
can use these keys to listen to the playback while you modify
the settings in realtime.
•
+ data dial or
decrease the setting of all parts by the same value.
•
+ numeric keypad
same value.
Operations for "1. Data display" – "7. Bank number" are the same
as in the Mixer page. For details on these parameters, refer to the
explanations for the Mixer page (
8. Detune
• This detunes the tuning relative to the standard pitch (440
Hz).
• This lets you make fine changes in the pitch of each part.
• Setting the melody part slightly sharp will make the melody
stand out, and setting the bass part slightly flat will give it
additional weight.
-12.8–+00.0–+12.7
0101
1101
will light, and you will enter
/
or
/
to select a
.
,
,
and
+
/
will increase or
will set all parts to the
p.170).
Chapter 3. VOICE MODE
9. Note shift
• This adjusts the pitch of each part in semitone steps.
-24–+00–+24
0101
1101
10. Transpose
• This adjusts the pitch of all parts in semitone steps.
-24–+00–+24
0101
1101
/
2. Tune
3
175
Advertisement
Table of Contents
