Yamaha QY700 Owner's Manual page 150

Original velocities
(Vel)
64 64 64
Range = +50 (M: 001:1 ~ 003:1)
(Vel)
64 74 84
Range = –50 (M: 001:1 ~ 003:1)
(Vel)
64 54 44
JOB 05 TRANSPOSE
• You use this job to tranpose a specified range of notes
(pitches) in a specified segment of the designated track. You
set the transposition level in semitone increments.
1. Track setting: TR
• This parameter selects the track.
01,...,32,Chd
0101
1101
• 01,...,32
Apply transposition to the corresponding se-
quence track.
• Chd
Apply transposition to the CHORD track.
2. Segment and notes (M and Note=)
• The two boxes to the right of the M select the track segment
containing the notes to be transposed. The first box sets the
measure and beat for the start point; the second box sets the
end point. The Note boxes select the range of notes (pitches)
64 64 64
94 104 114
34 21 14
Chapter 2. SONG MODE
-99,...,+00,...,+99
0101
1101
to be targeted: notes with pitches outside this range are not
affected.
001:1,...,999:8
Measure: beat
0101
1101
C-2,...,G8
Note range
3. Transposition amount
• The Transpose value sets the number of transposition inter-
vals (semitones). A value of +12 would transpose all tar-
geted notes up by exactly one octave, while a value of -12
would transpose down by an octave.
-99,...,+00,...,+99
0101
1101
7. Song Jobs
2
149