Table of Contents
Advertisement
2. Play Effects
• Each groove template is divided into equal quantizing in-
tervals: eighth-note intervals, eighth-note triplet intervals,
sixteenth-note intervals, or some other such value. On the
Groove View page, these intervals are represented by a grid
pattern.
• The quantizing template sets separate adjustment values for
each interval, allowing for subtle but swinging nuances. For
example, the template might increase the gate times and
velocities in the first half of the first beat, while delaying
the timing of notes that occur in the second half of the sec-
ond beat.
• You can create your own user templates by copying any of
the preset templates, then adjusting the various values to
create your own customized variations.
Setting the Groove Quantize Parameters
1. From the SONG PLAY screen, press
The QY700 enters the Play Effects submode.
2. Press
(Groove).
The Groove Quantize page appears.
3. Press
or
lect the track you want to work on.
• Note that a single screen can only display 16 tracks (tracks
1 to 16, or tracks 17 to 32). You can toggle between these
two groupings by pressing
4. Move the cursor to the TEMPLATE line.
5. Select the template using the data dial,
numeric keypad.
6. Move the cursor to each of the parameters you want
to change, and set the new value using the data dial,
/
, or the numeric keypad.
7. When you have finished making changes, press
to return to the SONG PLAY screen.
Viewing or Creating a Groove Template
1. From the Groove Quantize page, press
(GrovView).
The QY700 displays the Groove View page.
2. Press
or
lect the appropriate track.
• Each screen displays 16 tracks (tracks 1 to 16, or tracks 17
to 32). You can toggle between these two groupings by press-
ing
.
84
(PlayFx).
as necessary to se-
.
/
, or the
as necessary to se-
Chapter 2. SONG MODE
3. Move the cursor to the TEMPLATE setting. Select the
template using the data dial,
keypad.
4. If you have selected the user template (US), you can
now set the desired quantizing interval. To do so, move
the cursor to the QNT VALUE line, then set the inter-
val using the data dial, or
• Note that it is not possible to change the Quantize Value on
the preset templates (templates 1 to 100).
5. Now move the cursor to any parameter line or (if US
template) to any of the parameters in the grid area,
and adjust as necessary using the data dial,
or the numeric keypad.
6. When you have finished making changes, press
to return to the Groove Quantize page.
7. Press
again to return to the SONG PLAY
screen.
• You can change the template and the template parameter
values even while song playback is in progress.
1. Track numbers, track name,
and keyboard-track setting
• Each sequence track is identified by a track number.
• The highlighted track number selects the track for
quantization editing. It also selects the keyboard track —
the track that connects internally to the QY700's keyboard/
controller section.
• The upper right of the screen indicates the selected track,
both by its number and by its name. You can set up your
own track names from within SONG EDIT mode.
(
p.132)
1,...,32
0101
1101
/
, or the numeric
/
.
/
,
Advertisement
Table of Contents
