Step Recording: Pattern Track - Yamaha QY700 Owner's Manual

Step Recording: PATTERN track

Measure no. Meter
SHIFT F1 F2
• You use this method to write settings into the PATTERN
track one item at a time. For each measure you can set the
meter, the style, and the section.
1. Starting from the SONG PLAY screen, press
The QY700 displays the Recording Standby page. The RE-
CORDING indicator comes on.
2. Press (STEP) to select step recording.
3. Press or
the recording track to PATTERN.
4. Press .
The PLAY indicator comes on. The QY700 displays the
step recording page for PATTERN-track recording.
5. Select the measure you want to work on, using either
of the following methods.
• Press [D1] to move to the location parameter.
Select the measure using the data dial,
numeric keypad.
• With the cursor in the Meter, Section, or Style column,
press or to scroll up or down.
6. Press or to move the cursor to the appropriate
Meter, Section, or Style entry area, and enter the de-
sired value. You can enter any of these values using
the data dial or /
• You can enter the style number using the numeric keypad.
• You can enter the section letter by pressing a
microkeyboard key from E2(A) to E3(H).
Style no. Section
F3 F4 F5 F6
.
as necessary to set
/ , or the
. In addition:
Chapter 2. SONG MODE
Location
SHIFT EXIT
7. You can delete any incorrect entries by moving the
cursor back to the entry area and pressing
(Clear).
8. When you have finished, press
session and return to the SONG PLAY screen.
• Set the style number at the end of the song to 65 (=end). If
you set a different value, the song will not end. (
The remainder of this section describes the various screen set-
tings, and the use of the
Location
• The location area indicates the measure at which the cursor
is located.
• You can jump the cursor to a different measure by entering
the corresponding measure number into this area.
1. Press
tion-setting area.
2. Select the new location using the data dial,
the numeric keypad.
5. Song Recording
SONG PLAY
Song Recording
Step Recording
TR1~TR32
PATTERN
CHORD
to terminate the
(Clear) function.
[D1] to move the cursor into the loca-
2
p.113)
/ , or
125