Table of Contents
Advertisement
Using the DAC8811EVM with DXP
The DXP software defaults to output a 1-kHz sine wave from the DAC. Other waveform options include
square, sawtooth, triangle, and dc output options, as described in the
and amplitude of the output waveform are controlled by sliders on the DXP software interface. The DAC
update rate can also be modified, as shown in
Figure 12. DAC8811EVM: Frequency/Amplitude and Update Rate Adjustments
16
DAC8801/11EVM
Figure
12.
Copyright © 2005–2009, Texas Instruments Incorporated
DXP User's
Guide. The frequency
SLAU151A – January 2005 – Revised November 2009
Submit Documentation Feedback
www.ti.com
Advertisement
Table of Contents
