Advertisement
DELETING PROGRAMS
1. USING THE FORWARD OR BACK KEYS,
DISPLAY THE "CLOSED" PAGE OF THE
PROGRAM YOU WISH TO DELETE, I.E.
THE ONE SHOWING THE CLOSING TIME.
2. PRESS ENTER, AS TO ACCESS THE PRO-
GRAMMING MODE.
3. PRESS THE FORWARD AND BACK KEYS
SIMULTANEOUSLY: THE SERVO MAXIMO
GIVES A LONG BEEP AND THE PRO-
GRAM IS CLEARED.
CONNECTING TO A RAIN SENSOR (SENSO)
26
3
NOTES:
EACH TIME YOU PRESS TO ACCESS A
PROGRAM AND DO NOT MODIFY ITS
DATA WITHIN10 SECONDS, THE PRO-
GRAM EMITS AN ACOUSTIC SIGNAL
AND
THE SERVO MAXIMO CAN BE CONNECTED
TO A RAIN SENSOR (CLABER CODE 90915).
THE RAIN SENSOR CUTS OFF THE SERVO
MAXIMO WATERING PROGRAM IN CASE OF
RAIN, RESTORING IT AUTOMATICALLY
WHEN THERE IS NO MORE WATER LEFT IN
THE SENSOR.
THE RAIN SENSOR MUST BE CONNECTED
TO THE TWO SPECIAL ELECTRICAL CON-
TACTS PROVIDE INSIDE THE SERVO MAXI-
MO PROGRAMMING MODULE, USING THE
CONNECTOR SUPPLIED WITH THE SEN-
SOR.
THE TWO-WIRE CABLE MUST BE FED IN
THROUGH THE SEAT PROVIDED IN THE
BOTTOM OF THE SERVO MAXIMO. BE-
FORE FITTING THE CONNECTOR, REMO-
VE THE JUMPER PLACED OVER THE
TWO CONTACTS.
FOR THE CONNECTION DIAGRAM, SEE
RIGHT.
Steckverbinder im
Lieferumfang SENSO
BAR
0.5
1.0
L/MIN. 11
16
2.0
2.5
3.0
4.0
22
25
27
31
5.0
35
G
Advertisement
