Advertisement
20
6. PRESS THE ENTER KEY TO MOVE ON TO SET THE CLO-
SING TIME OF LINE A.THE DISPLAY NOW SHOWS THE
OK SYMBOL, INDICATING THAT THE CLOSING TIME CAN
BE SET WITH THE FORWARD AND BACK KEYS.
7. USE THE FORWARD-BACK KEYS TO SET THE CLOSING
TIME AS REQUIRED (E.G. 5:20). TO MOVE FORWARD OR
BACK QUICKLY, KEEP THE FORWARD OR BACK KEY
PRESSED.
8. AFTER SETTING THE TIME (E.G. 05:20) PRESS ENTER.
THE OK SYMBOL DISAPPEARS. THE CLOSING TIME OF
LINE A HAS BEEN MEMORISED AND IS OPERATIONAL.
THE SYMBOL OF PROGRAM 1 AT THE TOP OF THE
SCREEN REMAINS ON.
YOU CAN NOW PROCEED TO PROGRAM LINE B.
2. LINE B PROGRAM.
1. PRESS THE FORWARD KEY ONCE MORE. THE DISPLAY
WILL SHOW:
–
2 = PROGRAM 2 (1ST LINE B WATERING SESSION).
–
OPEN = OPENING TIME
–
00:00 = WITHOUT PROGRAMMING, THE OPENING
TIME IS 00:00(SEE RIGHT).
2. PRESS THE ENTER KEY TO MOVE ON TO SET THE OPE-
NING TIME OF LINE B.THE DISPLAY NOW SHOWS THE
OK SYMBOL, INDICATING THAT THE OPENING TIME CAN
BE SET WITH THE FORWARD AND BACK KEYS.
3
NOTES:
WHAT'S MORE, THE SERVO MAXIMO AUTOMATICAL-
LY PRE-SETS THE MINIMUM OPENING TIME FOR
LINE B, I.E. ONE MINUTE AFTER THE CLOSING TIME
ALREADY SET FOR LINE A, I.E. AT 5:21 (SEE RIGHT).
G
Advertisement
