Advertisement
Instruction Manual
THANK YOU FOR CHOOSING A WOLF PRODUCT
CAREFULLY READ THIS INSTRUCTIONS MA-
NUAL BEFORE PROGRAMMING, EACH SEC-
TION CONTAINS ALL THE INFORMATION RE-
QUIRED FOR THE CORRECT EXECUTION
OF EACH OPERATION.
Programming unit
extractor buttons
connector adapter
connector (not included)
INSTALLATION VON SERVO MAXIMO AN DEN WASSERHAHN
3
THE TAP MUST HAVE A 3/4" MALE
THREADED CONNECTION. IF NECES-
SARY, USE AN ADAPTER.
1. THE TAP MUST HAVE A 3/4" MALE
THREADED CONNECTION. IF NECESSA-
RY, USE AN ADAPTER.
2. UNSCREW THE RING-NUT WHICH FIXES
THE TAP CONNECTION.
3. HOLDING THE RING-NUT STILL WITH
TWO FINGERS, SCREW THE FEMALE 3/4"
CONNECTION ONTO THE TAP.
4. THEN FULLY TIGHTEN THE RING-NUT TO
FIX THE TIMER TO THE TAP. TIGHTEN
THE RING-NUT BY HAND ONLY; DO NOT
USE TOOLS (E.G. PLIERS).
5. CONNECT BOTH IRRIGATION LINES TO
THEIR RESPECTIVE QUICK-CLICK SYS-
TEM CONNECTORS
16
3/4" female
tap connection
Fixing ring-nut
Valve body
(one each side)
1/2" male
line connection
Quick-Click
1/2" Quick-Click
Line A
Outlet
Washable
filter
Line B
Outlet
1
DO NOT TURN ON THE TAP UNTIL
YOU HAVE PROGRAMMED THE SER-
VO MAXIMO.
1
DO NOT INSTALL THE SERVO MAXI-
MO INSIDE WELLS OR PITS, OR BE-
LOW GROUND LEVEL.
1
DO NOT INSTALL THE SERVO MAXI-
MO INDOORS.
1
DO NOT USE THE SERVO MAXIMO
WITH CHEMICALS OR LIQUIDS
OTHER THAN WATER.
1
DO NOT USE THE SERVO MAXIMO
WITH INLET PRESSURES ABOVE 10
3
BAR (140 PSI).
CAN BE CONNECTED TO 1/2" THREA-
DED CONNECTIONS.
Lid
LCD display
◄ Key
► Key
Enter Key
Programming unit
G
Advertisement
