Advertisement
PROGRAMMING OPENING AND
CLOSING TIMES
THE PROCEDURE IS EXACTLY THE SAME
AS THAT FOR SETTING THE CURRENT TIME
(CLOCK).
1. IN DISPLAY MODE, SCROLL THROUGH
THE PAGES TO THE PAGE YOU REQUIRE
THEN PRESS THE ENTER KEY: THE OK
SYMBOL APPEARS IN THE BOTTOM
RIGHT-HAND CORNER.
2. USE THE FORWARD-BACK KEYS TO IN-
CREASE OR DECREASE THE TIME.
3
TO MOVE FORWARD OR BACK QUIC-
KLY, KEEP THE FORWARD OR BACK
KEY PRESSED.
AFTER SETTING THE TIME, PRESS
ENTER. THE OK SYMBOL DISAPPEARS
AND THE OPENING OR CLOSING TIME
SET IS MEMORISED.
OPENING AND CLOSING LINE A/b IN MANUAL MODE
G
3
1. PRESS THE FORWARD (4) KEY OR THE BACK (3) UNTIL
THE "MANUAL LINE A/b" PAGE (SEE RIGHT) APPEARS.
AS THE SCREEN SHOWS, THE MANUAL OPENING TIME
CANNOT BE CHANGED, AND IS SET AT 15 MINUTES.
2. PRESS THE ENTER KEY: THE OK SYMBOL AND THE
CLOSED SYMBOL LIGHT UP
3. NOW, TO OPEN LINE A PRESS THE BACK (3) KEY AND
TO CLOSE IT PRESS THE FORWARD (4) KEY. UNLESS
THE LINE IS CLOSED IN MANUAL MODE, IT WILL CLOSE
AUTOMATICALLY AFTER 15 MINUTES.
3
NOTES:
IT IS NOT POSSIBLE TO EXIT THE "MANUAL LINE A/b"
PAGE AS LONG AS THE VALVE IS OPEN.
NOTES:
FOR BOTH LINES A AND B, IT IS ES-
SENTIAL TO START FROM THE 1ST
PROGRAM AVAILABLE (E.G. PRO-
GRAM 1 FOR LINE A AND PRO-
GRAM 2 FOR LINE B).
THE OPENING AND CLOSING
TIMES FOR THE PROGRAMS
WHICH FOLLOW MUST BE LATER
IN ORDER OF TIME. IN OTHER
WORDS, ONCE THE OPENING AND
CLOSING TIMES FOR THE 1ST
PROGRAM HAVE BEEN SET (E.G.
WATERING FROM 02:30 TO 03:15)
THE OPENING TIME FOR THE 2ND
PROGRAM MUST BE AT LEAST
ONE MINUTE AFTER THE CLOSING
TIME OF THE 1ST PROGRAM (THE-
REFORE: AT LEAST 3:16). IN
OTHER WORDS, TIME OVERLAPS
BETWEEN PROGRAMS ARE NOT
POSSIBLE.
SIMILARLY, THE CLOSING TIME OF
ANY ONE PROGRAM MUST BE AT
LEAST ONE MINUTE AFTER THE
OPENING TIME OF THE SAME PRO-
GRAM.
25
Advertisement
