Personal Safety, Continued; The Enviroment; Disposal - Ken DW 412 Instruction Manual

Safety/environment

-personal safety, continued

The enviroment

Disposal

KEN DW 412
Subject to alterations
Transport:
In transit and when the machine is handled, common sense and good
practice must be applied. See also section 4.
Installation/connection:
Installation of the machine must be carried out using the good practice.
See also section 4 - Installation instructions
NB! Connection of the machine to the electricity and water supply and
to the drains must only be carried out by persons duly authorized to
do so.
Environmental protection has been promoted to the greatest possible
extent.
The low water consumption of the machine ensures that also the
consumption of energy and the necessary chemicals for the cleaning
process are kept to a minimum.
The machine is made from materials - mainly stainless steel - which can be
recycled to a very large extent.
When the machine is to be disposed, the computer control and the
chemicals canisters with their hoses must be removed and treated as
chemical waste, in accordance with local/national provisions on waste
disposal.
Apart from this it is not necessary to take any special measures when
disposing of the machine.
As stated above the greatest majority of the materials can be recycled, and
the machine contains no hazardous or environmentally toxic substances
that require special treatment.
Section/page:2.2
17/9/2013