Parameters; Adjustments Of The Machine - Ken DW 412 Instruction Manual

Parameters

Adjustments of the machine

Description
Machine Number
Type of machine
Language
Condenser or exhaustion
This adjustment indicates whether the
machine is connected to exhaustion,
condenser or none.
Drain pump
This adjustment indicates whether the
machine is fitted with drain pump or not.
Water change
This adjustment indicates whether water
change is done automatically or manually.
The machine must be fitted with a drain
pump to do automatically water change.
Water change interval
(Number of washes)
Indicates number of washes between each
water change. If the machine is adjusted to
do automatical water change, the machine
will empty the water tank after the selected
number of washes. If the machine is
adjusted to manual water change an alarm
will go after the selected number of washes.
Re-electing program
Re-elect of the program which the machine
runs. When the machine is turned on and
after each wash the machine will be
adjusted to this program. The operator can
then just press the start key or select
another program if needed.
Heating wash tank effect (W)
Indicates the size of the heating element in
the wash tank. This adjustment is used for
estimating the consumption of energy and
validation of heating time, and by that
deciding if the heating element is defect.
KEN DW 412
Subject to alterations
Adjustments Possible
from factory adjustments
DW412 DW410, DW412
English English
Danish
German
Swedish
Norwegian
Exhaustion Exhaustion
Condenser
None
Not installed Installed
Not installed
Manual Manual
Automatic
0 0-999
No re-election Program 1
Program 2
Program 3
Program 4
No re-election
9000 0-99999
User adjustments
This adjustment must
ALWAYS be DW412 for
this type of machine.
Section/page:16.1
17/9/2013