Detergent consultant
-calibrating detergent by condutivity dosing, continued
KEN DW 412
Subject to alterations
11. To attach the different detergent adjustments to the programs, please
enter "PROGRAM SETTINGS" in "DETERG.CONSULT.".
12. Select program1-4.
13. Press key 2.
14. Select "CALIBRATION A,B,C or D".
15. Press key 2.
Repeat point 11-15 until the wanted number of detergent adjustments are
reached.
When calibrating is ended leave the "DETERG.CONSULT."-menu by
pressing key 4 repeatedly.
The machine is now ready for use.
If an external detergent supplier or time controlled detergent dosage is
wanted, see section 8 -
"DETERGENT CONSULTANT/SET DETER.DOSAGE".
KEN is willing to inform about supplier of detergent which is to be used in
the machine.
Section/page:10.2
17/9/2013