Other Adjustments/Inspection; Adjustment Of Rinse Aid Pump - Ken DW 412 Instruction Manual

Other adjustments/inspection

Adjustment of Rinse aid pump

KEN DW 412
Subject to alterations
If few drops of water or stripes occur on the tableware, the dosing of rinse
aid is either too low or too high.
The rinse aid pump is placed to the left behind the front plate and can be
adjusted with a screwdriver.
Clockwise: Less rinse aid.
Counterclockwise: More rinse aid.
Do not adjust more than 1/4 turn at a time. The result of the adjustment can
be seen on the tableware after the 5th wash.
A control of the dosing quantity can be made by removing the suction hose
from the rinse aid can behind the rinse aid pump. When the machine has
rinsed, you can see how many cm the rinse aid sinks in the hose.
1 cm corresponds to about. 0.5 ml. per 10 liter water. Air in the hose can be
pumped out by pressing with the screwdriver on the adjustment screw.
Section/page:9.1
17/9/2013