Ken DW 412 Instruction Manual page 37

Parameters
-adjustments of the machine, continued
Description
Sensor for chemical, rinse aid
Sensitivity of the level sensor for measuring
the rinse aid. This parameter is as a
standard set to 50% and kan be changed if
detecting the rinse aid is causing problems.
Communication, NetCom
Indicates whether the machine is connected
to TCP/IP network.
IP Adress
IP adress to TCP/IP network.
Daily check?
Indicates whether a daily procedure for
checking the machine is to be carried out.
Time for daily check
Number of hours when daily check is to be
carried out.
Slow water filling
Indicates how long (in minutes) a water fill
can last before a warning is displayed.
No water filling
Indicates how long (in minutes) a water fill
can last before an error is displayed.
Adjustment of detergent dosing
Hood motor
Indicates type of the hood motor.
Eco-adjustment
Drain after low level
When a machine with drain pump is
emptied, this parameter indicates how long
(in seconds) the drain pump must run after
the low level sensor is activated.
Autostart
Indicates whether if autostart of the
machine is on.
Autostart time
Indicates time for autostart.
Autostart days
Indicates which weekdays the machine is to
do autostart.
KEN DW 412
Subject to alterations
Adjustments Possible
from factory adjustments
50% 0-100%
No Yes
No
000.000.000.000
No Yes
No
0 0-23
4 0-99
5 0-99
Conductivity Conductivity
Time control
External
230 V 12 V
230 V
Yes Yes
No
30 0-999
No Yes
No
00:00 00:00 - 23:59
No days All weekdays
User adjustments
Section/page:16.3
17/9/2013