Table of Contents
Advertisement
PENBERTHY MODEL MGT-362 LEVEL MEASUREMENT TRANSMITTER
INSTALLATION, OPERATION AND MAINTENANCE INSTRUCTIONS
6 FACTORY ASSISTANCE
6.1 Field service
Trained field service engineers are available on
a time-plus-expense basis to assist in startups,
diagnosing difficult problems, or in plant
training of personnel. Contact the Emerson
factory for further details.
Although standard electronic units are
generally in stock, it is suggested that you keep
a spare transmitter on hand if the application is
critical. A good benchmark is one spare unit for
every ten units in service.
6.2 Disposal at the end of useful life
Penberthy Model MGT-362 transmitters are
used in a variety of fluid applications. By
following the appropriate federal and industry
regulations, the user must determine the
extent of preparation and treatment the
transmitter must incur before its disposal.
A Material Safety Data Sheet (MSDS) may
be required before disposal services accept
certain components.
Metal, glass and polymers should be recycled
whenever possible. Refer to order and
relevant technical data sheets for materials of
construction.
6.3 Telephone assistance
If you are having difficulty with your Penberthy
Model MGT-362 transmitter, contact your local
Penberthy distributor. You may also contact the
factory direct at (956) 430-2500 and ask for an
applications engineer. So that we may assist
you more effectively, please have as much of
the following information available as possible
when you call:
- Model #
- Name of the company from whom you
purchased your transmitter
- Invoice # and date
- Process temperature
- A brief description of the problem
- Trouble shooting procedures that failed
If attempts to solve your problem fail, you
may request to return your Model MGT-362
Transmitter to the factory for intensive testing.
You must obtain a return authorization (R.A.)
number from Emerson before returning
anything. Failure to do so will result in the unit
being returned to you without being tested,
freight collect. To obtain an R.A. number, the
following information (in addition to that above)
is needed:
- Reason for return
- Person to contact at your company
- 'Ship-to' address
There is a minimum charge for evaluation
of non-warranty units. You will be contacted
before any repairs are initiated should the cost
exceed the minimum charge. If you return a
unit under warranty, but it is not defective, the
minimum charge will apply.
7 EXPLODED PARTS DIAGRAM
80
Clamp
181
Housing
270
Sensor
FIGURE 3
MGT-362 Exploded Parts Diagram
5
Advertisement
Table of Contents
