Table of Contents
Advertisement
PENBERTHY MODEL MGT-362 LEVEL MEASUREMENT TRANSMITTER
INSTALLATION, OPERATION AND MAINTENANCE INSTRUCTIONS
FIGURE 6
Control Drawing Intrinsically Safe for Model MGT-362R Sensor (18J54-009)
Hazardous area
FMRC approved electronic
control unit with entity
NOTES
1. Installation shall conform to the manufacturer's instructions supplied with the electronic control unit as well
as the national electric code and ANSI/ISA-RP 12.6 'installation of intrinsically safe instrument systems in
hazardous (classified) locations'.
2. Maximum non-hazardous area voltage must not exceed 250 V rms or V DC.
3. Enclosure: NEMA4, ENCL4.
Neither Emerson, Emerson Automation Solutions, nor any of their affiliated entities assumes responsibility for the selection, use or maintenance of any product.
Responsibility for proper selection, use, and maintenance of any product remains solely with the purchaser and end user.
Penberthy is a mark owned by one of the companies in the Emerson Automation Solutions business unit of Emerson Electric Co. Emerson Automation Solutions,
Emerson and the Emerson logo are trademarks and service marks of Emerson Electric Co. All other marks are the property of their respective owners.
The contents of this publication are presented for informational purposes only, and while every effort has been made to ensure their accuracy, they are not to be
construed as warranties or guarantees, express or implied, regarding the products or services described herein or their use or applicability. All sales are governed by
our terms and conditions, which are available upon request. We reserve the right to modify or improve the designs or specifications of such products at any time without
notice.
Emerson.com/FinalControl
parameters
Non-hazardous area
8
Advertisement
Table of Contents
