Operation; Operation Mode; Preset Temperature - Vivax HPS-22CH65AERI/O1 R32 User Manual

ENG
The operation mode can not be changed
Select
Then the space operation mode is...
Always heating mode
Always cooling mode
Automatically changed by the software
based on the outdoor temperature (and
depending on installer settings of the
indoor temperature), and takes monthly
restrictions into account.
Note: Automatic changeover is only
possible under certain conditions.
See the ''FOR SERVICEMAN''> ''AUTO
MODE SETTING'' in "Installation and
owner's manual (M‐thermal split indoor
unit)".
Adjust space operation mode by the room
thermostat , see ''ROOM THERMOSTAT'' on
"Installation and owner's manual (M‐
thermal split indoor unit)".
Go to ''MENU''>''OPERATION MODE'', if you
press any key to select or adjust, the page will
appear:
OPERATION
Operation Mode
See "Adjusting space operation mode":
Preset Temperature
PRESET TEMPERATUER has PRESET TEMP.\
WEATHER TEMP. SET\ECO MODE 3 items.
PRESET TEMP
PRESET TEMP. function is used to set
different temperature on different time
when the heat mode or cool mode is on.

PRESET TEMP. = PRESET TEMPERATRE

The PRESET TEMP. function will be off in
these conditions.
1 ) AUTO mode is running.
2) TIMER or WEEKLY SCHEDULE is

Go
TEMPERATURE''
Press ''OK''.
The following page will appear:
13
-
.
running.
to ''MENU'' >
>''PRESET
VIVAX
''PRESET
TEMP''.