ENG
Press OK the page will appear:
Press OK to show the mean of the error code:
INFORMATION
A total of eight fault codes can be recorded.
The parameter function is used to display the
main parameter, there are two pages to show
the parameter:
The DISPLAY function is used to set the
interface:
Use ''OK'' to enter and use ''◄ '', ''► '', ''▼
'', ''▲'' to scroll.
Operation Parameter
This menu is for installer or service engineer
reviewing the operation parameter.
At home page, go to ''MENU'' >
''OPERATION PARAMETER''.
Press ''OK''. There are six pages for the
operating parameter as following.
Use ''▼ '', ''▲'' to scroll.
27
-
VIVAX