Load Best Performance Settings; Features Setup Page - PCchips M810 series User Manual

Mainboard User's Manual

Load Best Performance Settings

If you select this item and press Enter a dialog box appears. If you
press Y, and then Enter, the Setup Utility loads a set of fail-safe
default values. These default values are not very demanding and
they should allow your system to function with most kinds of
hardware and memory chips.
Note: It is highly recommended that users enter this option to
load optimal values for accessing the best performance.

Features Setup Page

This page sets some of the parameters for peripheral devices
connected to the system.
AMIBIOS SETUP – PERIPHERAL SETUP
(C) 2000 American Megatrends, Inc. All Rights Reserved
OnBoard FDC
OnBoard Serial Port
OnBoard IR Port
OnBoard Parallel Port
Parallel Port Mode
Parallel Port IRQ
Parallel Port DMA
OnBoard Game Port
OnBoard MIDI Port
MIDI Port IRQ
OnBoard PCI IDE
OnBoard AC'97 Sound
OnBoard AC'97 Modem
USB Function Support
USB Function for DOS
OnBoard FDC
Use this item to enable or disable the onboard
floppy disk drive interface.
OnBoard Serial
Use this item to enable or disable the onboard
Port
COM1 serial port, and to assign a port address.
OnBoard Ir Port
Use this item to define the protocol for an infrared
port if you have installed an optional IR port. The
choices are IrDA and ASKIR.
Onboard Parallel
Use this item to enable or disable the onboard
Port
LPT1 parallel port, and to assign a port address.
The Auto setting will detect and available address.
26
Enabled
3F8h/COM1
Disabled
378h
SPP
7
N/A
201h
300h
10
Both
Enabled
Auto
ESC : Quit
Enabled
F1 : Help
Disabled
F5 : Old Values (Shift)F2
F6 : Load Optimal values
F7 : Load Best performance values
-¯¬® : Select Item
PU/PD/+/- : Modify
: Color