Power Management Setup Page - PCchips M810 series User Manual

Hide thumbs Also See for M810 series:
Table of Contents

Advertisement

Password Check
If you have entered a password for the system, use
this item to determine, if the password is required to
enter the Setup Utility (Setup) or required both at
start-up and to enter the Setup Utility (Always).
Boot to OS/2 >
Enable this item if you are booting the OS/2
64MB
operating system and you have more than 64MB of
system memory installed.
L1/L2 Cache
Leave these items enabled since all the processors
that can be installed on this board have internal
L1/L2 cache memory.
System BIOS
If you enable this item, a segment of the system
Cacheable
BIOS will be cached to main memory for faster
execution.
Auto Detect
When this item is enabled, BIOS will disable the
DIMM/PCI Clk
clock signal of free DIMM/PCI slots.
CLK GEN Spread
Use this item to set the system bus spread
Spectrum
spectrum for the installed processor.

Power Management Setup Page

This page sets some of the parameters for system power
management operation.
AMIBIOS SETUP – POWER MANAGEMENT SETUP
(C) 2000 American Megatrends, Inc. All Rights Reserved
Power Management
Standby Time Out
Suspend Time Out
Display Time Out
Hard Disk Time Out
Ring On Power On
Keyboard Power On
RTC Alarm Power On
RTC Alarm Date
RTC Alarm Hour
RTC Alarm Minute
RTC Alarm Second
Power On by LAN
3: BIOS Setup Utility
APM/ACPI
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Every Day
12
ESC : Quit
30
F1
: Help
00
F5
: Old Values (Shift)F2
Disabled
F6
: Load Optimal values
F7
: Load Best performance values
-¯¬® : Select Item
PU/PD/+/- : Modify
: Color
23

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

M810lrM810

Table of Contents