Fuses - Suzuki GSF1250 Owner's Manual

GSF1250S
To adjust the beam horizontally:
Insert 5 mm hexagon wrench as
shown and turn the adjuster
CD
clock-
wise or counterclockwise.
FUSES
To adjust the beam vertically:
Turn the adjuster (2) clockwise or
counterclockwise from under the
cowling.
The main fuse is located under the
seat. To access the fuse, remove the
seat by referring to the SEAT LOCK
AND HELMET HOLDERS section.
One 30A spare fuse is located inside
the fuse box cover.
The fuses are located inside of the left
frame cover. Two spare fuses (one
1 0A and one 15A} are provided inside
the fuse box.
NOTE: Remove the fuse box before
opening box lid and replacing fuses.
The fuses are designed to open when
a circuit overload exists in individual
electrical system circuits. If any elec-
trical system fails to operate, then the
fuses must be checked.
FUSE LIST
• 30A MAIN fuse protects the posi-
tion lights, license plate light, turn
signal lights and taillight.
• 10A HEAD-HI fuse protects the
headlight high beam and speed-
ometer.
• 10A HEAD-LO fuse protects the
headlight low beam.
• 15A IGNITION fuse protects the
side stand relay, oxygen sensor,
ECU, solenoid, fuel pump relay,
starter relay, ignition coils and
cooling fan relay.
• 15A SIGNAL fuse protects the
speedometer, position light, horn,
turn signal lights, license plate
light, taillight and brake light.
• 10A FUEL fuse protects the ECU,
fuel pump, injector and speedom-
eter.
• 15A FAN fuse protects the cooling
fan motor.
CAUTION
Installing a fuse of incorrect rating
or using aluminum foil or wire
instead of a fuse may seriously
damage the electrical system.
Always replace a blown fuse with
a fuse of the same type and rating.
If the new fuse blows in a short
time, consult your Suzuki dealer
or a qualified mechanic immedi-
ately.
6-44
6-45