Calling Group Message Receiver - AT&T MERLIN LEGEND MLX-20L Supervisor Manual

Features
Calling Group Message
Receiver
Your system manager can program a calling group to receive
messages and choose a particular display telephone as the
message receiver. Any display telephone, such as your
telephone, an agent telephone, or the telephone of a
co-worker who is not part of the group, can be chosen to be
the message receiver. Calling groups can share the same
message receiver.
The system operator
display message for
calling group queue can leave a message by dialing-the
feature code for leaving a message (pressing Feature and
dialing 53, followed by the calling group's extension number.
The system operator can leave a message by using either the
feature code or the Send/Remove Message button on his or
her console.
The designated message receiver's message lamp will light if
there is a voice mail message in the calling group's mailbox.
A calling group without a message receiver cannot receive
messages at the calling group's extension. A caller who tries
to leave a message hears an error tone or sees Can't
Send/Remove Message on a display telephone.
or any other inside caller can leave a
the group. Inside callers waiting in the

Calling Group Message Receiver

3-3