About Your Calling Group Supervisor
Telephones
7.
Select Auto Dial[AutoD].
8.
Select Inside.
9.
Select Enter.
10.
Dial the extension number.
11.
Select Enter.
12.
Repeat Steps 5 through 11 to program additional
buttons.
13.
Press Home.
To Program an Agent Button on
Supervisor Analog Multiline
Telephones
1.
Label the button to be programmed with the agent's
name or extension.
2.
Slide the T/P switch to the P position.
Press the button labeled
3.
extension.
4.
Dial
*22
5.
Dial the extension number.
Repeat Steps 3 through 5
6.
buttons.
7.
Slide the T/P switch to the center position.
.
Programming a Telephone
with the agent's name or
to program additional
2-21