Mitsubishi Electric 800 Series Instruction Manual page 26

Pr.340 setting Pr.79 setting
0 (initial value)
1
2
0 3, 4
6
7
0
1
2
3, 4
1
*4
6
7
Operation mode at power ON or
power restoration
External operation mode
PU operation mode
External operation mode
External/PU combined operation mode
External operation mode
X12 (MRS) signal ON: external operation
mode
X12 (MRS) signal OFF: external
operation mode
NET operation mode
PU operation mode
NET operation mode
External/PU combined operation mode
NET operation mode
X12 (MRS) signal ON: NET operation
mode
X12 (MRS) signal OFF: external
operation mode
Operation mode switchover
Switching among the External, PU, and NET operation mode
*1*3
is enabled.
PU operation mode fixed
Switching between the External and Net operation mode is
*3
enabled.
Switching to the PU operation mode is disallowed.
Operation mode switching is disallowed.
Switching among the External, PU, and NET operation mode
*3
is enabled while running.
Switching among the External, PU, and NET operation mode
*1*3
is enabled.
External operation mode fixed (Forcibly switched to External
operation mode.)
Same as when Pr.340 = "0"
INVERTER SETTING
4
25