Operation Checklist / Safety Information - Yetter 5000 Series Operator's Manual
Stalk devastator, corn stalk roller
Hide thumbs
Also See for 5000 Series:
- Owner's manual (48 pages) ,
- Owner's manual & parts list (32 pages) ,
- Owner's manual, part identification (20 pages)
Table of Contents
Advertisement
DEVASTATOR OPERATION CHECKLIST
Please fill this out after the Yetter Stalk Devastator has been installed.
DATE____/____/____
COMBINE MAKE/MODEL__________________ FRONT TIRE SIZE______________
SIZE______________
REAR AXLE POSITION______________ SNAPPING ROLLS USING______________
DECK PLATE ANGLE_____° (USE ANGLE FINDER)
HARVEST SPEED______MPH
HEAD CART INFO:
MAKE/MODEL___________________
SEE PAGE 14 FOR HEAD & TRAILER ADJUSTMENTS
WATCH OUT FOR THIS SYMBOL. IT POINTS OUT IMPORTANT SAFETY
PRECAUTIONS. IT MEANS: "ATTENTION---BECOME ALERT!"
It is your responsibility as an owner, operator, or supervision to know & instruct everyone using this machine
at the time of initial assignment & at least annually thereafter, of the proper operation, precautions, & work
hazards which exist in the operation of the machine in accordance with OSHA regulations.
The following safety instructions, combined with common sense, will save your equipment from
needless damage and the operator from unnecessary exposure to personal hazard. Pay special
attention to the caution notes in the text. Review this manual at least once a year with all operators.
1. Read and understand the operator's manual before operating this machine. Failure to do so is
considered a misuse of the equipment.
2. Make sure equipment is secure before operating.
3. Always keep children away from equipment when operating.
4. Make sure everyone that is not directly involved with the operation is out of the work area
before beginning operation.
5. Make sure all safety devices, shields, and guards are in place and functional before beginning
operation
6. Shut off all power to adjust, service, or clean.
7. Keep hands, feet, and clothing away from moving parts. It is a good idea to remove all jewelry
before operating.
8. Inspect the machine periodically during operation for signs of excessive wear, loose fasteners,
and unusual noises.
YETTER KIT # - 5000-____
SNAPPING ROLL HEIGHT (OPERATING POSITION)____INCHES
HEAD SPEAD__________
ANGLE FINDER) _________
LENGTH____________
BE ALERT!
YOUR SAFETY IS INVOLVED.
Safety Is No Accident
CORN HEAD MAKE/MODEL___________________
ANGLE TORSION ARM (OPERATING POSITION - USE
TIRE SIZE_______________________
REAR TIRE
CHOPPING BLADES YES / NO
3
Advertisement
Table of Contents
