F5.3: Soft Pedal Effect Depth; F5.4: Sustain Pedal Type; F5.5: Aux Pedal Type; I F6: Metronome Volume - Yamaha P-120 P-120S Owner's Manual

The Function Mode

F5.3: Soft Pedal Effect Depth .................................................................

setting of "1" produces minimum effect depth while a setting of "5" produces maximum effect
depth. Press the [–/NOM] and [+/YESL] buttons simultaneously to recall the default setting
of "3".

F5.4: SUSTAIN PEDAL Type....................................................................

F5.5: AUX PEDAL Type............................................................................

jack, the effect produced by operating the pedal (ON/OFF, dynamics, etc.) might be reversed.
If that is the case, use this setting to correct pedal operation. The setting range is from 1 to 2.
Press the [–/NOM] and [+/YESL] buttons simultaneously to recall the default setting of "1".
F6: Metronome Volume______________________________
I SHORTCUT: You can jump directly to the metronome functions by pressing the
[–/NOM] and [+/YESL] buttons to set the metronome volume as required. The volume range
is from 1 through 20. A setting of "1" produces minimum sound, while a setting of "20" pro-
duces maximum metronome volume. Press the [–/NOM] and [+/YESL] buttons simulta-
neously to recall the default setting "10".
F7: Preset Song Part Cancel Volume __________________
back (see page 17 for information on the "preset song part cancel" function). Use the
[–/NOM] and [+/YESL] buttons to set the volume as required. The volume range is from 0
through 20. A setting of "0" produces no sound, while a setting of "20" produces maximum
volume. Press the [–/NOM] and [+/YESL] buttons simultaneously to recall the default setting
"5".
along with. Set to "0" if you don't want to hear the part.
36
P-120/P-120S
This function sets the depth of the soft pedal effect. The effect depth range is from 1 to 5. A
Depending upon the pedal that is connected to the SUSTAIN PEDAL jack or AUX PEDAL
• Make sure that the power is switched OFF when connecting or disconnecting the pedal.
NOTE
• If the SUSTAIN PEDAL type is set to "2", disconnecting the sustain pedal while the power is switched
on may leave the sustain active, causing notes to sustain indefinitely. In this case, switch the power
"OFF" then back "ON".
[TEMPO/FUNCTION#] button while holding the METRONOME [START/
STOP] button.
The volume of the metronome sound can be changed. After selecting "F6", use the
This function sets the volume at which a "canceled" part is played during preset song play-
Adjust the part volume to a comfortable level to use the "canceled" part as a guide to play