Special Instructions / Service - Clearaudio Tangent User Manual

6. Special Instructions / Service

Please take the time to fill out the enclosed warranty card and return it to clearaudio
or your local distributor / dealer. If you do not return this card within 14 days after
purchase the guarantee will only be for the law regulated guarantee time periode
During any transportation of the tonearm, always remove the carriage out of the rope
(as it was after unpacking the tonearm the first time) and use the original packaging. If
there is any damage to any parts of the tonearm that could influence exact tracking,
please contact your local dealer, distributor or clearaudio. Use only special acrylic
cleaner, which is not alcohol based to clean the acrylic parts of the tonearm. Otherwise
you could damage the material (hair cracks and spots on the acrylic surface).
• Never put oil or any similar liquids on the rope or into the precision bearings !
•
Never move or readjust the screws with the saphir bearing inside the carriage.
They are to be adjusted only by qualified dealers or at the clearaudio factory.
• Keep your Tangent tonearm out of extreme temperature and extreme moisture
environments.
• The tonearm dust cover should be left on the arm during normal operation.
Always replace after making any adjustments or cleaning procedures.
Clearaudio electronic GmbH
Spardorfer Str 150
91054 Erlangen
Germany
Tel/Phone: +49-(0)1805/059595
www.clearaudio.de
info@clearaudio.de
Seite/Page 25
Tangent
Bedienungsanleitung
 clearaudio electronic GmbH 2005