Special Instructions / Service - Clearaudio TT 3 User Manual

5. Special Instructions / Service

Please take the time to fill out the enclosed warranty card and return it to clearaudio or
your local distributor / dealer.
If you do not return this card within 14 days after purchase the guarantee will
only be for the law regulated guarantee time period.
During any transportation of the tonearm, always protect the carriage with a piece of e.g.
foam so that the carriage is not able to move during transportation.
Please use for sending the original packaging.
If there is any damage to any parts of the tonearm that could influence exact tracking,
please contact your local dealer, distributor or clearaudio.
Use only special acrylic cleaner, which is not alcohol based to clean the acrylic parts of the
tonearm. Otherwise you could damage the material (haircracks and spots on the
acrylic surface).
Never put oil or any similar liquids on the glass tube or into the precision
•
bearings !
Never move or readjust the screws in the carriage of the tonearm.
•
They are to be adjusted only by qualified dealers or at the clearaudio
factory.
Keep your TT 3 -
•
moisture environments.
The tonearm dust cover should be left on the arm during normal operation.
•
Always replace after making any adjustments or cleaning procedures.
Seite / Page 12
tonearm out of extreme temperature and extreme
clearaudio electronic GmbH,
Spardorfer Strasse. 150,
D-91054 Erlangen
Germany
Phone : +49-(0)9131/40 300 100
Phone : +49-(0)9131/51683
info@clearaudio.de
www.analogshop.de
www.clearaudio.de
TT 3
User manual / Bedienungsanleitung
 clearaudio electronic GmbH 2012