Clearaudio Tangent User Manual page 20

Slide the headshell with the cartridge through the proper drill in the carriage of the
tonearm. For this, lift up with the cuing lever that the headshell will be positioned under
the rope of the cueing-lever-unit (as shown in picture). Connect the pins of the
tonearm cable with the corresponding pins of the cartridge. Please take care of the
colour codes.
1
3
Lock the headshell in this position with the screw on the top of the carriage with the
hex key wrench (#1,5). Take one or more counterweight(s) (it depends on the weight
Seite/Page 20
3a
Tangent
Bedienungsanleitung
Red: right channel / R+
Green: right channel / R-
White: left channel / L+
Blue: left channel / L-
 clearaudio electronic GmbH 2005
52 mm
2