Assembly Object Connection Points - Panasonic EYFR03 User Manual

Assembly Object Connection Points

This section defines the assembly object connection points provided by the EYFR03 product
line. As per the EtherNet/IP
connection point are equivalent. This document will refer to them as connection point
throughout.
Output (O->T) Connection Points
The following connection points are used by the EYFR03 to take input data from the network.
These connection points allow you to control the running operation of the qualifier. Other
setting parameters may be configured through the vendor-specific objects.
160
Name
Item Number UINT
Item Type USINT
Batch Reset USINT
Suspend BOOL
VIN SHORT_STRING
Total size: 6-106 bytes
161
Name
Item Number UINT
Item Type USINT
Batch Reset USINT
Suspend BOOL
Reserved USINT
Total size: 5-6 bytes
162
Name
Item Number UINT
Item Type USINT
EYFR03 User Manual
Chapter 7: EtherNet/IPTM
TM
specification for the Assembly Object, instance number and
Data Type
Instance number of items to run. Deactivate any running parameter,
job, or group if 0.
Type of item to run:
0 - Parameter
1 – Group
2 – Job
Ignored if Item Number is 0.
When this value changes, the batch counts of the currently running
parameter or group is reset.
When set, suspends the unit without stopping a running parameter,
group, or job.
Max length 100
Data Type
Instance number of items to run. Deactivate any running parameter,
job, or group if 0.
Type of item to run:
0 - Parameter
1 – Group
2 – Job
Ignored if Item Number is 0.
When this value changes, the batch counts of the currently running
parameter or group is reset.
When set, suspends the unit without stopping a running parameter,
group, or job.
Padding byte for devices requiring even connection point sizes.
Data Type
Instance number of items to run. Deactivate any running parameter,
job, or group if 0.
Type of item to run:
0 - Parameter
1 – Group
Description
Description
Description
82 of 110 v1.6.0
20 January 2020