Table of Contents
Advertisement
Tool Status Codes
The tool status indicator for each active parameter shows the status of the tool for the parameter.
When the tool is ready to run, the indicator should be green with no number. If the tool is not
ready to run or a warning or error condition occurs, the indicator will change to yellow for a
warning or red for an error and display a code to indicate the tool condition. The possible codes
are:
Unit Radio Status Indicator
The unit radio status indicator shows the status of the radio in the unit. In normal use, the
indicator should be green with no number. If the radio is not working correctly, the indicator
will be red with an error code.
Network Status Indicator
The network status indicator shows the status of the Ethernet ports on the unit. When the
Ethernet is used, the indicator will be green and show the number of currently active network
connections. If no Ethernet cable is plugged into either port, the indicator will be yellow. If the
network initialization fails, the indicator will be red and show an error code. The Network Status
screen shows more detailed information.
History
Soft keys
1. No function
2. Previous – Go to the previous page of more recent tightenings. When on the first page, this
key will be blank.
3. Next [ENT] – Go to the next page of older tightenings. When on the last page, this key will
be blank.
EYFR03 User Manual
Chapter 1: Overview
Figure 7: History screen
17 of 110
v1.6.0
20 January 2020
Advertisement
Table of Contents
