Table of Contents
Advertisement
Example:
*%13%%*
30. Reset parameter batch count
This command resets the count of the specified parameter. If the specified parameter is not
running, this bar code is ignored.
Data: number of up to 3 digits specifying the parameter number to reset the batch (1-100)
Example:
*%30%35%*
This bar code would reset the current batch count of parameter 35.
To reset all batch counts at once, use command 10. Reset batch count.
Serial Printer
The EYFR03 provides serial printer output in two formats, line and CSV. The EYFR03 will
print tightenings based on the format selected on the second page of the Unit Setup menu.
Additionally, rejects may not be printed based on the Report to Network column of the NOKs
setting table. Both line and CSV formats contain the following fields in the same order:
• VIN
• Controller Name
• Cell ID
• Tightening ID
• Time
• Job Number
• Job Sequence Number
• Parameter Number
• Parameter Name
• Last Parameter Write Time
• Tool Number
• Tool Name
• Tool Serial Number
• OK/NOK
• Result
• Count
• Batch
• Batch Status
EYFR03 User Manual
51 of 110
v1.6.0
Chapter 4:
20 January 2020
Advertisement
Table of Contents
