Safety; Symbols Used; Warnings - MICRO-EPSILON IF2030/ENETIP Operating Instructions Manual

Safety

1.
System operation assumes knowledge of the operating instructions.
1.1
The following symbols are used in these operating instructions.
i
Measurement
1.2
Connect the power supply and the display/output device according to the safety regulations for electrical
equipment.
> Risk of injury
> Damage to or destruction of the interface module
The supply voltage must not exceed the specified limits.
> Damage to or destruction of the interface module
Avoid shocks and impacts to the interface module.
> Damage to or destruction of the interface module
IF2030/ENETIP
Safety

Symbols Used

Indicates a hazardous situation which, if not avoided, may result in minor or moder-
ate injury.
Indicates a situation that may result in property damage if not avoided.
Indicates a user action.
Indicates a tip for users.
Indicates hardware or a software button/menu.

Warnings

Page 5