Installing The Appliance - KKT KOLBE EB8501ED User Manual

Installation

Installing the appliance

Important: Unplug your oven before performing
installation or maintenance!
Installation should be carried out according to the inst-
ructions by a professionally qualified person.
The manufacturer declines all responsibility for any
damage to persons, animals or things due to a wrong
installation.
• Fit the appliance into its surround (beneath a work-top
or above another appliance) by inserting screws and
plastic covers into the 2 holes that can be seen in the
frame of the oven when the door is open (A).
• For the most efficient air circulation, the oven should
be fitted according to the dimensions shown in the
following figure:
• The rear panel of the cabinet must be removed so that
air can circulate freely. The panel to which the oven is
fitted should have a gap of at least 70 mm at the rear.
Note: If the oven is matched with a hob, it is
!
essential to follow the instructions contained in
the booklet supplied with the other appliance.
40
A
For a built-in oven to work well the cabinet must be of the
right type:
• The panels of the adjoining furniture should be heat
resistant. Particularly when the adjoining furniture is
made of veneered wood, the adhesives should be able
to withstand a temperature of 120°C. Plastic materials
or adhesive which cannot withstand this temperature
will become deformed or unstuck.
• To comply with safety regulations, once the appliance
has been fitted it should not be possible to make con-
tact with the electrical parts.
• All parts which offer protection should be fixed in such
a way that they cannot be removed without the use of a
tool.
A
Kunststoff-
kappe
A