KKT KOLBE EB8501ED User Manual page 38

Care and cleaning
Disassembling / assembling the oven door
To make it easier to clean the inside of your oven,
the oven door can be removed, by proceeding as follows
(see figure):
• Open the door completely and lift the 2 levers (B).
• Now, shutting the door slightly, you can lift it out
by pulling out the hooks (A) as shown in figure.
To reassemble the door:
• With the door in a vertical position, insert the two hooks
(A) into the slots.
• Ensure that the seat (C) is hooked perfectly onto the
edge of the slot (move the oven door backwards and
forward slightly).
• Keep the oven door open fully, unhook the 2 levers (B)
downwards and then shut the door again.
Disassembly and cleaning of the door glass
The oven door is made up of 3 panes of glass and has
vents at the top and bottom. When the oven is operating,
air is circulated through the door to keep the outer pane
cool. If condensation has worked its way in between the
glass panes, the door can be dismantled in order to clean
in between the panes.
Remove the door as per above instruction and place it on
a protective surface (e.g. on a table cloth) to prevent it
from getting scratched. To avoid breakage of glass during
cleaning, the door handle should line up with the edge of
the table, so that the glass lies flat.
1 2
38
B
A
C
• Press the button on left and right side of door, take off
the top rail. (Fig. 1)
• Take out the inner glass slowly. (Fig. 2)
• Loosen the clips with a screwdriver. (Fig. 3)
• Take out the middle glass. (Fig. 4)
Clean the glass panes and other parts with a damp
microfibre cloth or a clean sponge and a solution of hot
water with a little washing-up liquid. Wipe dry using a soft
cloth.
3 4