External Input; Sensor Characteristics; Reset Mode - Siemens SITRANS FM MAG 5000 Operating Instructions Manual

7.2

External input

By applying 11 to 30 V DC to terminals 77 and 78, it is possible to perform:
● Batch control (start, stop, hold/continue)
● Reset totalizer
● Force/freeze output
● Q
See External input (Page 87).
Note
Batch settings
Only MAG 6000.
Not available in MAG 5000, MAG 5000 CT and MAG 6000 CT.
Note
Manual cleaning
If the digital input is used for manual cleaning, the relay output also automatically changes to
"cleaning".
7.3

Sensor characteristics

The sensor characteristics menu shows:
● If a SENSORPROM
● Suppress error P 40 (SENSORPROM
● Sensor size
● Calibration factor
● Correction factor
● Excitation
See Sensor characteristics (Page 88).
Note
If a SENSORPROM is not installed, check the sensor characteristics to see if they match the
product label and the previous customer settings.
7.4

Reset mode

The reset mode is used for resetting/presetting totalizers or for restoring the factory settings.
SITRANS FM MAG 5000/6000 IP67
Operating Instructions, 12/2019, A5E02338368-AD
2 (night)
max
is installed or not
®
not installed)
®
Operating
7.4 Reset mode
53