xBP-6E2P3
2U high performance PICMG 1.3 Backplane
Board Rev.
0
Quick REFERENCE
Version 1.3
First Level Debugging
1. If ATX +12V power supply is used on SHB, make sure that the +12V power cable (J19) is
conected in SHB and +12V power supply cable mated in J17.
2. Remove all peripheral boards and SBCs.
3. Remove all cables from backplane.
4. Make sure that all the Power Good LEDs are on.
J21
J 22
J 5
J 38
J 30
J36 J27 J34 J33 J32 J31
Connectors
J1-3: PCI Connector
J31-32: USB
J 5: PICMG Connector
J33+34: SATA
J 21: PCIeX16 Connector
J36: PWR button
J 22: PCIe x1 Connector
J37: Reset button
J30+38: ATX Connector
J3
J2
J1