Example Of Changing A Parameter - YASKAWA E7B T Series Manual

Example of Changing a Parameter

Table 1.31 provides an example of how to change parameter "C1-01" (Acceleration Time 1) from 30 sec to 20 sec.
Step
Number
1
2
3
4
5
6
7
8
9
10
11
Table 1.31 Changing a Parameter in the Programming Menu
Digital Operator Display Description
Power supply turned ON.
MENU Key pressed to enter drive menu.
MENU Key pressed to enter quick programming
menu.
MENU Key pressed to enter advanced
programming menu.
DATA/ENTER pressed to access monitor display.
INCREASE or DECREASE Key pressed to display
C1-01 (Acceleration Time 1).
DATA/ENTER Key pressed to access setting
display. The setting of C1-01 (30.00) is displayed.
Shift/RESET Key pressed to move the flashing
digit to the right.
DECREASE Key pressed to change set value to
20.00 s.
DATA/ENTER Key pressed to enter the set data.
"END" is displayed for 10 s and then the entered
value is displayed for 0.5 s.
The monitor display for C1-01 returns.
Yaskawa Electric America, Inc.
Installation Guide IG.E7B.02 Rev: 04-11
Date: 11-1-04 Page 38 of 46