Table of Contents
Advertisement
Drive Main Menus
The Drive's parameters and monitoring functions are organized into groups called menus that make it easier to read
and set parameters. The Drive is equipped with five menus. The five menus and their primary functions are shown in
Table 1.30 and are directly available by pressing the MENU key.
Main Menu
The Drive can be run in this menu. Also called the "Monitor" menu.
- DRIVE -
Use this menu for monitoring values such as frequency reference or output current, displaying fault
Operation
history or displaying the fault traces.
- QUICK -
The Drive can be programmed in this menu.
Quick Setting
Use this menu to set/read the most commonly used parameters.
- ADV -
The Drive can be programmed in this menu.
Programming
Use this menu to set/read every parameter.
- VERIFY -
The Drive can be programmed in this menu.
Modified Constants
Use this menu to set/read the parameters that have been modified from their factory default settings.
(Parameters)
For Bypass units Auto-Tuning can only be accomplished through the DriveWizard software
- A.TUNE -
(Part Number DWST616-C2). A free download from www.drives.com.
Auto-Tuning
The Drive can be programmed in this menu.
Auto-tune the Drive in order to utilize the bi-directional speed search feature.
Table 1.30 Drive Main Menus
Primary Function(s)
Yaskawa Electric America, Inc.
Installation Guide IG.E7B.02 Rev: 04-11
Date: 11-1-04 Page 27 of 46
Advertisement
Table of Contents
