3.2 Removing Left Driveline
WARNING
Exercise caution when working around the blades. Blades are sharp and can cause serious injury. Wear gloves when
handling blades.
1. Remove four M10 hex flange head bolts (A) and loosen two
M10 hex flange head bolts (B). Remove driveline shield (C).
2. Remove eight M8 hex flange head bolts (A) and two drum
shields (B).
3. Remove two M10 hex flange head bolts (A) and remove
driveline shield (B).
215339
INSTALLATION INSTRUCTIONS
Figure 3.5: Driveline Shield
Figure 3.6: Driveline Shields
Figure 3.7: Driveline Shield
9
C
A
B
B
A
B
A
Revision A