MacDon R216 Installation Instructions Manual page 27

6. Position two drum shields (B) as shown. Apply a bead of
medium-strength threadlocker (Loctite
around the threads of eight M8 hex flange head bolts (A).
Use the bolts to secure the drum shields in place. Torque
hardware to 27 Nm (20 lbf·ft).
7. Position driveline shield (C) as shown. Apply a bead of
medium-strength threadlocker (Loctite
around the threads of four M10 hex flange head bolts (A)
and two M10 hex flange head bolts (B). Use bolts (A)
and (B) to secure driveline shield (C) in place.
8. Tighten all hardware on driveline shields.
WARNING
Ensure the cutterbar is completely clear of foreign objects.
Foreign objects can be ejected with considerable force when
the machine is started and may result in serious injury or
machine damage.
215339
INSTALLATION INSTRUCTIONS
®
243 or equivalent)
Figure 3.33: Driveline Shields
®
243 or equivalent)
Figure 3.34: Driveline Shield
21
B
A
C
A
B
Revision A