Maintenance Intervals; Preventive Maintenance Intervals - Xerox 701P44148 Operator's Manual

11 . M ai n te na n c e

Maintenance intervals

Preventive maintenance intervals

Air Filter
Feed and Retard
Rollers
Automatic
Document
Feeder
Document Glass
Constant Velocity
Transport (CVT)
Ski
11 - 2
The scanner requires minimal maintenance by the operator.
However, it is essential that you perform these tasks when
indicated to ensure reliable operation and maximum product life.
To avoid any maintenance delays, ensure that you have the
necessary spare parts and cleaning supplies on hand.
Component Action
Replace
Replace
Clean
Clean
Clean
Maintenance interval
• Replace after 3,000 hours.
• The scanner software will notify you when
the Air Filter requires replacement.
Refer to the online Help (Advanced
Scanning) for step-by-step
instructions on replacing the filter.
• Replace after 100,000 feeds.
• The scanner software will notify you when
the Feed and Retard Rollers require
replacement.
Refer to the online Help (Advanced
Scanning) for step-by-step
instructions on replacing the rollers.
Clean the ADF whenever there is paper dust
visible in the feeder.
Refer to the online Help (Advanced
Scanning) for step-by-step
instructions on cleaning the ADF.
Clean daily or whenever specks are
noticeable in scanned images.
Refer to the online Help (Advanced
Scanning) for step-by-step
instructions on cleaning the
Document Glass.
Clean whenever hole-punch marks are
noticeable in scanned images.
Refer to the online Help (Advanced
Scanning) for step-by-step
instructions on cleaning the CVT Ski.
Do c u Co l or 8 00 0 /7 00 0 O pe r a to r M a nu a l