Xerox 701P44148 Operator's Manual page 138

5. J o b Ti c k e t/ J ob S e tu p
Image descriptions:
Image operations:
5- 1 0
Select the Orientation and Sides Imaged from their respective
drop-down lists:
• Select Portrait if the short sides are the top and bottom edges
and the long sides are the right and left edges.
• Select Landscape if the long sides are the top and bottom
edges and the short sides are the right and left edges.
• Select 1-Sided to print images on only 1 side of your output
paper.
• Select 2-Sided to print images on both sides of your output
paper.
• Select Head to Toe to print images on both sides of your
output paper in head-to-toe format.
In the Image operations area, select the Image shifts options and
the Scale option (if applicable).
• Image shifts alter the page shift for the front page or the front
and back page depending the Sides Imaged selection.
– X: This is the distance to shift the page(s) in a horizontal
direction from the left edge of the paper. A positive
number (+) shifts the page to the right; a negative number
shifts the page to the left. X distance is applied to all
specified pages unless X2 is enabled. If X2 is enabled, X
is for ordinal odd pages.
– Y: This is the distance to shift the pages in a vertical
direction from the top edge of the paper. A positive
number (+) shifts the page up; a negative number shifts the
page down. Y distance is applied to all specified pages
unless Y2 is enabled. If Y2 is enabled, Y is for ordinal odd
pages.
• Scale: Enter a Scaling value in the Scale to text box. You can
scale an image down to 1% of the original size or enlarge the
image up to 1000% of the original size.
Check the Auto-Fit button to automatically scale the image
from the original size to fit on the output paper stock size.
F r ee F l o w S ca n ne r 66 5E O p er a to r M a nu a l