Safety
Electical symbols
The following symbols are displayed on the scanners name plate:
Alternating Current
Direct Current (AC Adaptor/Imprinter)
WARNING: This equipment must be connected to a protective earth circuit
This equipment is supplied with a plug that has a protective earth pin. This plug will only fit into
an earthed electrical outlet. This is a safety feature. If you are unable to insert the plug into the
outlet, contact your electrician to replace the outlet.
Disconnect Device
The power cable is the disconnect device for this equipment. It is attached to the side of the
machine as a plug-in device. To remove all electrical power from the equipment, disconnect the
power cable(s) from the electrical outlet.
Emergency Power Off
If any of the following conditions occur, turn off the machine immediately and disconnect the
power cable(s) from the electrical outlet(s).
•
The equipment emits unusual odors or makes unusual noises.
•
The power cable is damaged or frayed.
•
A wall panel circuit breaker, fuse, or other safety device has been tripped.
•
Liquid is spilled into the machine.
•
The machine is exposed to water.
•
Any part of the machine is damaged.
Maintenance Information
1.
Any operator product maintenance procedures will be described in the user documentation
supplied with the product.
2.
Do not carry out any maintenance on this product which is not described in the customer
documentation.
3.
Do not use aerosol cleaners. The use of cleaners that are not approved may cause poor
performance of the equipment, and could cause a dangerous condition.
4.
Use supplies and cleaning materials only as directed in this manual.
User Guide
®
®
Xerox
DocuMate
6710
1-3