Xerox 701P44148 Operator's Manual page 54

2. P r o d uc t i on P r i n te r S e tt i ng s
2- 4
4.
Type your <site specific print queue> in the Print queue
text box; refer to the example below:
NOTE: Type the appropriate information for your server and
your print queue based on the server and the print queue at
your site.
5.
From the Printer model: drop-down list, select DocuColor
8000: or your site specific printer.
6.
From the Print controller/server type: drop-down list, select
your site specific print controller/server type.
7.
To ensure that the connection to the printer is working, select
Test Print; this sends a test print to the printer.
If you do not get a test print from the printer, return to Step 1
and begin again. If you continue to have problems adding a
printer, see your network or system administrator or
assistance.
8.
Select OK. This returns you to the Production Printer
Settings dialog box.
9.
Select Close. This closes the Production Printer Settings
dialog box.
F r ee F l o w S ca n ne r 66 5E O p er a to r M a nu a l