Installing The Scanner Software - Xerox 1200 User Manual

Installing the scanner software

1
2
20
Chapter 3
m ColorSync, a system program that records color information about scanned
images so the colors stay consistent in different applications and on
different devices, such as printers and monitors
Most of the files on these disks are compressed. To install them, you must use
the Installer.
Your scanner package may include additional software. If you want to install
and use the software, see the on-disk documentation that comes with the
software for installation and user instructions.
Apple recommends that you make backup copies of the disks and
IMPORTANT
store the originals in a safe place. If you need instructions for copying disks,
see your Macintosh user's manual.
To install the scanner software and start scanning, remember that you
need at least 20 MB of space available on your hard disk. You must have
system software version 7.5 or a later version to use the scanner with your
Macintosh computer.
Note: If you're using a system with 8 MB of RAM, Apple recommends that
you turn on Virtual Memory.
To install the software:
Turn off any automatic virus-detection programs and restart your Macintosh computer.
If you leave these programs on, problems may occur. You can turn the virus-
detection programs back on after installation is complete.
Insert OneScanner Dispatcher Disk 1 into a floppy disk drive.
If necessary, open the icon for OneScanner Dispatcher Disk 1 . A window
appears, showing the contents of the disk.