Xerox 1200 User Manual page 146

1
2
138
Chapter 10
Set up the scanner first: Before you connect the Transparent Media Adapter to
your scanner, you need to set up the Apple Color OneScanner and install the
scanner software. See Chapters 2 and 3 for instructions if you haven't yet set
up the scanner hardware and software.
To connect the adapter:
Switch off the scanner and then switch off your Macintosh computer.
Power switch.
"O" is off and
"I" is on.
Devices connected through SCSI cables require a certain power-on and
power-off sequence. See "Switching the Power On," in Chapter 2, for more
information.
Grip the scanner top cover on both sides and lift it off.
Put the original cover away in a safe place for future use. The adapter replaces
the cover.
Grasp cover here.